|
 
Download the pdf brochure
The
V1m has the lowest cost of the V1 family. It consists of a 2u rack mount
unit that can house two drive bays. It has no front panel controls. You
can control the V1m via ethernet or RS-422 with Doremi's free VToolsPro
software or the RCV2 remote control.
The V1m supports compression ratios of 2:1 to 34:1. It features one audio
expansion port. All other features and specifications are similar to the
standard V1.
V1
DCT Series Common Features:
The
V1 is a high-quality Video Disk Recorder/Player designed to record and
playback video and audio using hard drives. Due to its familiar controls
and operation, the V1 can function as an instant replacement for a video
tape recorder of any format, or as an additional recorder/player. It is
field accurate and can be controlled from an industry standard RS-422
serial interface using the familiar “Sony 9 pin protocol.” At
the same time, the V1 has the advantage of locating immediately to any
position on the disk, providing instant access to the video data.
The video data is compressed using DCT compression and recorded along
with the audio and the time code address onto the hard disk drive.
V1m
Features:
Video Formats Inputs & Outputs:
Composite, SVHS, YUV/RGB, SDI
Audio:
2 analog Audio Channels and Embedded
audio on SDI
Audio (Optional): up to 4 channels analog
or 4 channels AES/EBU.
Video Sync input
Time Code in/out: VITC & LTC and
D-VITC
Other: Wide SCSI, 2 RS-422 ports, Biphase,
100Base-T, GPI (option)
Video Compression: Selectable from 2:1 to
34:1
Download
Recording Time Chart PDF
|
Ordering
Information
|
|
V1m-400
|
V1
without front panel control
|
|
OPTIONS
|
Remote Control Unit - RCV2
One audio expansion slot available
Analog Audio: One card can be added for a total of 4 analog audio
tracks
Digital Audio: One card can be added for 4 digital audio tracks
AES/EBU
Redundant Power Supply
GPI4 - 4inputs uses one of the external serial ports
|
|
